3560 Marquis Dr, Garland, TX 75042 info@steelhavencontainers.com 719-701-1940
Sale

500 Gallon Waste Tank for Double Toilets for Sale | Steel

Original price was: $1,850.00.Current price is: $1,570.00.

This 500 gallon waste tank for double toilets for sale provides waste storage for compatible jackleg and steel toilet cabins. Priced at $1,699.00, it combines steel construction with two covered access points for scheduled pump-outs.

  • Internal steel framework and supports with 2mm steel cladding.
  • Black primer exterior finish.
  • Two 150mm corner emptying points with covers.
  • Tank dimensions: 2.515m long × 2.43m wide × 0.61m high.

Request a delivery quote and confirm compatibility with your toilet cabin. Ask about the gallon standard and whether the pictured steps, handrails, and connection fittings are included.

Guaranteed safe and secure checkout

  • PayPal
  • Bank wire / ACH
  • SSL encrypted

Card and PayPal details are handled by PayPal, never stored on our site. Wire and ACH instructions are emailed right after you order.

SKU: SKU-0147 Categories: ,
  • Delivery quoted at checkout from your ZIP code
  • Pick up free at our Garland, TX yard
  • Report any problem within 7 days of delivery
  • Questions? Call 719-701-1940

Description

500 Gallon Waste Tank for Double Toilets

Need waste storage for a double toilet cabin where a sewer connection is unavailable? This 500 gallon waste tank for double toilets for sale provides a collection point for toilet waste until it can be pumped out. Priced at $1,699.00, it is designed for use with compatible jackleg and steel toilet units.

The tank combines a steel body, internal framework, and 2mm steel cladding. Two covered corner emptying points provide access for servicing. If you are comparing a double mains toilet waste tank for sale, this model brings the key features together in a low-profile design.

Waste Storage for Double Toilet Cabins

This 500 gallon waste holding tank for double toilets collects wastewater from a compatible toilet setup. It is a practical option for construction sites, temporary facilities, and outdoor locations that need toilet waste storage without a direct sewer connection.

The double-toilet design is intended for compatible jackleg or steel toilet cabins. Before ordering, match the cabin’s base, support requirements, and waste connections to the tank. This helps you choose the right unit for your installation.

  • Listed 500-gallon capacity: Provides storage between scheduled pump-outs.
  • Steel construction: Includes internal framework and supports.
  • 2mm steel cladding: Forms the tank’s outer steel body.
  • Black primer finish: Provides a primed exterior surface.
  • Two covered emptying points: 150mm corner access points for waste removal.
  • Double-toilet application: Designed for compatible jackleg and steel toilet units.

Steel Construction with Internal Supports

The steel waste tank for double toilets has an internal framework and supports, with 2mm steel cladding. Its steel floor and internal steel surfaces form a dedicated waste-storage unit for a compatible toilet installation.

The exterior is primed in black. Ask about any additional coating needed for your location and use, particularly where the tank will face regular outdoor exposure.

Two Corner Emptying Points for Servicing

This 500 gallon toilet waste holding tank includes two 150mm corner emptying points with covers. Their positions give your waste-service provider access options when planning pump-outs.

Leave these points accessible when positioning the toilet cabin and tank. Your service provider should confirm hose access, connection requirements, and a suitable emptying schedule before the facilities go into use.

The emptying points are service openings. Confirm the separate toilet inlet arrangement and required pipe fittings for your installation.

Dimensions and Specifications for Steel Waste Tank for Double Toilets

Double Toilet Waste Tank Specifications
Specification Details
Product price $1,699.00
Listed capacity 500 gallons; confirm whether the rating uses US or Imperial gallons
Intended application Compatible double mains toilet installations
Compatible toilet types Jackleg and steel toilet units, subject to fit and connection checks
Construction Steel with internal framework and supports
Cladding thickness 2mm steel
Exterior finish Black primer
External length 2.515m / approximately 8ft 3in
External width 2.43m / approximately 7ft 11.7in
External tank height 0.61m / approximately 2ft
Floor and internal surfaces Steel
Emptying access Two 150mm corner emptying points with covers

Dimensions above describe the tank body. Allow additional space for connections, servicing, and any access equipment used with your toilet cabin.

Plan Your Toilet Setup with Confidence

Choosing a 500 gallon waste holding tank for double toilets starts with the cabin you plan to use. Check its footprint, support points, and waste outlet position, then plan how the tank will be installed and emptied.

  • Check the fit: Compare the tank dimensions with your toilet cabin.
  • Plan the connections: Confirm the inlet, pipework, and fittings required.
  • Prepare the location: Arrange suitable ground support and installation equipment.
  • Keep service access clear: Allow your waste contractor to reach the emptying points.
  • Confirm the package: Ask whether steps, handrails, hoses, and fittings are included.

Looking at a complete sanitation setup? Browse our toilet cabins and shower blocks. For a single-toilet installation, compare our single mains toilet waste tank and confirm which model fits your cabin.

Match Pump-Out Visits to Actual Use

A 500 gallon toilet waste holding tank needs a service schedule based on how much wastewater enters it. User numbers, flush volume, connected sinks, and operating hours all affect how quickly it fills.

Arrange regular level checks and pump-outs with your waste-service provider. Do not assume a fixed number of days between visits based on capacity alone.

Keep wipes, paper towels, and other rubbish out of the toilets. For general advice on what should not be flushed, see the EPA wastewater care guidance. This product stores waste for removal; it is not a complete septic treatment system.

Request a Quote for Your steel waste tank for double toilets

If you need a double mains toilet waste tank for sale, send us your cabin details and delivery ZIP code. Our team can help you check the listed configuration and provide a delivery quotation.

This steel waste tank for double toilets is priced at $1,699.00. Request your quote and confirm the tank, connection requirements, and accessories needed for your site.

FAQs About 500 Gallon Waste Tank for Double Toilets for Sale

What is this tank used for?

It stores waste from a compatible double toilet installation until a waste-service provider pumps it out. It is intended for use with compatible jackleg and steel toilet units.

Will it fit any double toilet cabin?

Compatibility must be checked. Compare the cabin’s footprint, support requirements, and waste connections with the tank before ordering.

What is the tank made from?

It uses steel construction with internal framework and supports, 2mm steel cladding, and a black primer finish. The floor and internal surfaces are steel.

How is the tank emptied?

It has two covered 150mm corner emptying points for servicing. Arrange pump-outs with a suitable waste-service provider and keep the access points clear.

Are steps and handrails included?

Steps and handrails appear in the product photographs, but the written package details do not confirm their inclusion. Ask for an itemized quotation before ordering.

Does 500 gallons mean US or Imperial gallons?

The current capacity listing does not specify the gallon standard. Confirm the rated capacity with our team before calculating storage volume or servicing needs.

How often does it need emptying?

That depends on usage and the volume of wastewater entering the tank. Your waste contractor can help set a schedule based on actual use and regular level checks.

How do I get a delivery price?

Request a delivery quote with your ZIP code, site access information, and toilet cabin details. We can then discuss the supplied package and transport requirements.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.