Most delivery problems come from the site, not the truck. A few hours of preparation saves a failed delivery and protects the container for years.
1. Check the route
The truck needs a straight, level approach of at least twice the container’s length, about 12 ft of clear width, and roughly 14 to 15 ft of overhead clearance for the raised bed. Walk the route and look for wires, branches, gates and tight turns.
2. Level the ground
A container needs to sit evenly. Level the spot and compact it. A pad of crushed gravel extending past the container on every side drains well and resists sinking.
3. Raise it off the soil
Railroad ties, concrete blocks or piers at the corners keep the steel off wet ground and let air flow underneath. This slows rust and keeps doors working.
4. Decide the door direction
A tilt-bed truck cannot rotate the container. Tell us which way the doors should face when you order.
5. Be there
An adult must be on site to approve the position and inspect the unit with the driver.
Our full Site Preparation guide has more detail, and our Shipping Policy explains how delivery works.